1.  
    歡迎光臨中機機械制造有限公司。!
     
     
    Current position◇ Stocker and reclaimer
    Last Technical specification parameters
    1、The bucket wheel reclaimer works on the same line with the stocker and the stocking and reclaiming could work at the same time.
    2、The machine is the reclaiming equipment driven by the coal and each unit is composed by 2 or 3 machines. The whole machine is sprayed with red lead primer and saffron finishing coat. The running mechanism and the cover shall both be painted with safety mark (chute alternating with yellow and black colors)  
    3、The turning and lift mechanism shall, as required by the crane machinery safety criterion, be installed with two types of safety curb equipments; the turning mechanism is installed at the right and left turning limit places and the lift mechanism at the lowest and highest position of the reclaimer. The turning mechanism belongs to the same type of the stocker and the maintenance spare parts are common and interchangeable.
    4、While debugging the back balance weight of the hoist arm support, the head of which shall be tightened by steel wire for safety sake and prevent the weight exceeds the limit and cause the support turning accident. Attention shall also be given to the lift current in the debugging.
    5、Except indicated in the figure, the safety platform and the stairs could be added according to the onsite practical operation requirement.
    6、After the installation of the rotation gear ring and the platform, 5-ton load shall be added for commissioning, when it’s proved to be completely normal, the drive room and arm support could be installed.
    7、The windows in the driver’s room are decorated with alloy aluminum and air-conditioner could be equipped according to the clients’ requirements.
    8、The machine shall set the plate in obvious position and the content of which shall be otherwise determined. Its size and technical requirements shall meet with the stipulations in JB8-82.
    9、The cart power supply adopts the safety sliding line.
    10、The gauge 4500-6000 could be automatically adjusted according to the clients’ requirements.
    11、The bucket wheel reclaimer’s cart running and big arm support turning adopt the timing with frequency conversion.  

    1、The primer of the whole machine is coated with iron-red anticorrosive varnish twice and the color of the finishing coat depends on the requirements of the clients.The weight tray and the running mechanism cover shall both be painted with safety mark (chute alternating with yellow and black colors).
    2、After the installation of the roller and the carrier roller, they shall rotate flexibly without any lock or touch.
    3、The balance weight is subject to the debugging and the principle is to ensure the realization of the idle amplitude movement. The automatic arm support pitch-up is at any time prohibited in any position.
    4、The arm support joint saddle shall firstly be equipped with the arm support, after flexible adjustment, it experiences the spot welding with the upright post and the two sides of each saddle are welded at the same time.
    5、After the installation of the electric equipments, they must accord with the technical performance requirements.
    6、The lighting equipments shall be configured according to the clients’ practical conditions.
    7、Plate shall be set at the obvious place for the machine and the size and technical requirements shall meet with the JB8-82 stipulation.
    8、This machine could work together with reclaimer on the same line without conflict.
    9、 This stocker could adopt the high gantry.

    Specification parameters

    Name

    Unit
    Parameter
    Name
    Unit
    Parameter
    Name
    Unit
    Parameter
    Name
    Unit
    Parameter

    Type

    QL200.25

    Bucket wheel mechanism

     Type

    Open type, oil-cooling type, electric roller driven type
    Charge-in belt

    Belt speed

    m/s
    2.5
    Ingredient filter  

    Type

    Open-type flowing filter

    Block<100mm

    Reclaiming ability

    t/hr
    煤炭200-400
    礦石300-800

    Diameter

    mm
    2800

    Belt width

    mm
    800

    Bucket capacity

     t

    3

    Self weight

    t
    45

    Bucket quantity

    10

    Power

    kw
    15

    Total power

    kw
    83(81.5)

    Single bucket capacity

    1
    35

    Oil-cooling electric roller

    YD型
    Y-150-250 80-63
    操作方式
    手控

    Bucket wheel power

    kw
    15

     

    回轉機構
    半徑
    mm
    25000

    Speed

    r/min
    20
    Running mechanism

    Speed

    m/min
    14

    Speed

    r/mm
    0.186

    Lift mechanism

    Reclaiming height

    mm
    7500

    Power

    kw
    7.5×4
    Remarks
     1. Between the bracket of each motor are the old type. 2.The self-weight does not include the active balance weight

    Angle

    ±90。

    Speed

    m/s
    0.083

    Motor type

    YZR-160MB-6
    YZR-160MB-6

    Power

    kw
    11(10)

    Power

    kw
    11

     

    JZR2-22-6
    JZR2-22-6

    Motor type

    Y160L-6(JO2-61-6)

    Motor type

    YZR-160L-6 FC=25
    (JZR2-31-65)
    %(JC=25%)

       Work system
    Wheelbase* gauge
     

    m
    FC=25 % 6×4.5

    Throughput

    Coal 400-1000, ore 800-1600

    Operation speed

    14m/min

    Rotation institution
    Amplitude
    Running mechanism
    Suspension arm belt

    Maximum coal pile height

    11m

    Running wheel quantity

    8
    working speed:
    25%
    25%
    25%
    100%

    Maximum extent

    30m

    running wheel diameter

    500MM

    Motor

    Type

    YZR160L-6
    YZR160M -6
    YZR160M-6
    B3typeY180M-4

    Amplitude range

    Rise 5。  Lower 16。

    Rail type

    Heavy rail 38KG/M  

    Power

    9KW
    5.5KW
    7.5X4KW
    18.5KW

    Amplitude time

    56s

    Maximum wheel pressure

     19.5 19.5 ton

    Rotation speed (ro/min)

    930
    930
    940
    1500

    Amplitude drive type

    Rope roller drive

    Suspension arm belt speed

     3/ 3m/second

    Transmission mechanism

    Total transmission ratio

    4712.4
    48.57
    52
    20.49

    Amplitude pulley block rate

    10

     Belt width

    800MM

    Reducer

    Type

    BW3922-17X11-5.5
    JZQ-400-1-72
    Worm wheel reducer
    JZQ-500-V-ZZ
    鋼絲繩規格
    拉繩
    D-6X31-1-24-170

    Gantry headroom height

    6200MM

    Transmission ratio

    187
    48.75
    20
    15.75
    變幅繩
    D-6X37-1-13-180

    Gauge*wheelbase (M)

    6*6

    Open-type gear

    Type

    Taper gear
    Cycloid quantity
    Column gear
    Productivity
    Ore, powered ore
    1600T/HR

    Rotation angle

    ±150。

    Calculation wind pressure I

    25kg/m 3

    Transmission ratio

    3
    8.4
    2.6
    Coal
    800T/HR

    Rotation speed

    0.318/min

    40kg/m 3

    Modulus

    16MM
    8MM
    total power
    75KW

    Rotation bearing type

    Small pivot and trolley aa

    100kg/m 3

    Gear quantity

    17/51
    10/84
    21/43/55

    Bearing wheel quantity

    8

     Active balance weight

    15.5 ton

    Circle diameter

    1
    384.3300
    168·344·440

    Bearing wheel diameter

    300MM

     Total power

     74.5kw

    Detent
    Type
    YDWZ-200/25J
    YDWZ-200/25J
    YDWZ-200/25J

    Bearing motor-way diameter (m)

    3

    Total weight

    120 ton

    Drive moment (N.M)
    200
    200
    200
    Contact telephone0510-5405553
    Mobile phone13606193887
    14
    DM80030-14

    Active balance weight

    1

    Assembly

    17380
    17380
    13
    DM80030-13

    Electric equipments

    1

    Assembly

    1500
    1500
    12
    DM80030-12

    Stairs

    4

    weld assembly

    14412
    3603
    11
    DM80030-11

    Cart operation mechanism

    1

    Assembly

    11300
    11300
    10
    DM80030-10

    Gantry

    1

    Assembly

    18100
    18100
    9
    QL200.25.10

    Electric appliance equipment

    1
    920
    9
    DM80030-09

    Rotation stand

    1

    Assembly

    9150
    9150
    8
    QL200.25.8

    Running mechanism

    4
    6200
    8
    DM80030-08

    Rotation institution

    1

    Assembly

    9984
    9984
    7
    QL200.25.7

    Chassis assembly

    1
    12000
    7
    DM80030-07

    Filler

    1

    Assembly

    456
    456
    6
    QL200.25.6

    Ingredient filter  

    1
    3245
    6
    DM80030-06

    Tailstock assembly

    1

    Assembly

    6815
    6815
    5
    QL200.25.5

    Drivers room

    1
    2200

    Borrow pieces 4

    5
    DM80030-05

    Amplitude mechanism

    1

    Assembly

    17183
    17183
    4
    QL200.25.4

    Stander

    1
    13520

    Stander weight adjustment total weight

    4
    DM80030-04

    Drivers room

    1

    Assembly

    1525
    1525
    3
    QL200.25.3

    Charge-in belt

    1
    5140

    Add-in balance weight 10T

    3
    DM80030-03

    Upright column

    1

    Assembly

    7466
    7466
    2
    QL200.25.2

    Lift mechanism

    1
    850

     

    2
    DM80030-02

    Suspension arm belt

    1

    Assembly

    7203
    7203
    1
    QL200.25.1

    Bucket wheel

    1
    925

     

    1
    DM80030-01

    Arm stander

    1

    Assembly

    6250
    6250
    Serial Number
    Code

    Name

    Number
    Material
    single piece
    Total

    Remarks

    Serial Number
    code

     Name

    Number

    Material

    single piece

    Total

    Remarks
    Weight

    Weight

     

    1. {关键词}