1.  
    歡迎光臨中機機械制造有限公司。!
     
     
    Current position→◇ Swing feeder back to catalogue
    (規格技術參數)
    click for zoom-in
    explanation
    1、The electric source is the supplied by soft wire to manipulate the equipments.
    2、When the handspike baffle of the swing feeder rises to push the coal slot flashboard, lock and fix it with the handspike handle to prevent the fall during the working of the baffle.
    3、When the feeder is charging the materials, tighten the rail clamping device with the rail channel to prevent the digression of the feeder.
    4、Drill the ф80 hole on the frame steel plate according to the detailed position of the rail clamping devices grease cup in installation.
    5、When installing the retaining switch, install and fix it on the frame according to the general figure (11F219-2) and the retaining switch assembly figure (11f240-92).
    6、When the strobe is started, if one side of the feeder driver is found to be placed with the heavy things, then the wheel pressure shall be increased to reduce the sliding phenomenon.
    7 、When the feeder is assembled, weld the electric switch box on the frame.
    purpose
    conveyed materials
    material granularity
    productivity
    Current category and voltage (V)
    swing mechanism
    Motor
    decelerator
    open-aa gear
    detent
    walking speed
    Motor
    decelerator
    type
    power(KW)
    revolution rpm
    type
    speed ratio
    teeth number
    type
    type
    power(KW)
    revolutionrpm
    type
    speed ratio
    bent axle revolutionr.p.m
    wabbler journey(mm)
    TJ2-200
    Trip wheel diameter
    28
    56
    200mm
    feed the coal on the glue conveyor
    0-200mm
    350-400T/h
    380
    Y132 M2-6-B3
    5.5
    950
    ZQ35-25-IIK
    24.42
    modulus
    speed ratio
    electromagnet type
    15.4
    Y132 M2-6-B3
    5.5
    950
    ZQ40-16-IVE
    16.46
    58.3
    180
    8
    2
    MZD1-200
     
    15
    NutAM10
    A3
    4
    0.011
    0.044
    GB52-76
    14
    BoltM10x30
    A3
    4
    0.029
    0.116
    GB30-76
    13
    Shaft joint cover
    1
    4.93
    4.93
    11F240-115
    12
    clamping device I
    1
    53
    53
    11F240-111
    11
    clamping device II
    1
    67
    67
    11F240-97
    10
    Driver equipment
    1
    224
    224
    11F240-94
    9
    Retaining switch equipment
    2
    6.5
    13
    11F240-92
    8
    Baffling wheel assembly
    4
    22
    88
    11F240-88
    7
    Driven wheel equipment
    1
    175
    175
    11F240-79
    6
    Riding wheel equipment
    2
    113
    226
    11F240-70
    5
    Running transmission mechanism
    1
    369.7
    369.7
    11F240-67
    4
    Swing mechanism
    1
    600
    600
    11F240-49
    3
    Shaking apparatus
    1
    413
    413
    11F240-45
    2
    Handspike
    1
    81
    81
    11F219-3
    1
    Frame
    1
    2461
    2461
    11F240-3
    SN
    Name
    Material
    Quantity
    single piece
    total
    Standard no.
    Drawing No.
    Remark
    Weight(Kg)
    Material table
    total Weight
    4776
     
     

    1. {关键词}