1.  
    歡迎光臨中機機械制造有限公司。!
     
     
    Current position→◇ Blending Double Bucket Wheel Bi-directional Reclaimer Back to catalogue
    (規格技術參數)
    Click for zoom-in
    wheel
    Dolly operation mechanism
    Belt conveyor
    Ingredient Belt conveyor
    Coal scuttle gate electric control equipment
    Metal structure
    Wheel(L)
    1.3m
    Motor
    type
    TDO3-160M-12/6
    Performance
    Throughput (Q)
    1500t/hr
    Performance
    Throughput (Q)
    1500t/nr
    尺寸
    Gate width (B)
    400mm
    Form
    Double combination I-shape bracket
    Gauge(I)
    3m
    功率(N)
    5Kw/7.5kw
    帶寬(B)
    1000mm
    帶寬(B)
    1000mm
    Gate height (H)
    JD3-100s-6
    梁高(H)
    1.8m
    Number of wheels (n)(n)
    4
    轉速(n)
    450rpm/950rpm
    帶速(v)
    1.6m/s
    帶速(V)
    1.6m/s
    電動機
    型號
    1.5Kw
    梁寬(B)
    1.8m
    直徑(D)
    400mm
    制動器
    型號
    TJ2-200
    機長(L)
    27.8Im
    機長(L)
    2m
    功率(N)
    1000rpm
    梁長(L)
    30m
    速度
    第一檔(V進)
    23.04m/min
    制動力距(MZL)
    16Kg-m
    電動滾筒
    型號
    TDY-75.2.0-80.50
    電動滾筒
    型號
    JDY 40.2.0-80.32
    轉速(n)
    WD-78
    設計生產能力
    1500t/hr
    第二檔(V退)
    11.19m/min
    配用電磁鐵型號
    MZDI-200
    功率(N)
    15Kw
    功率(N)
    4Kw
    蝸輪箱
    型號
    總功率(N)
    125KW
    立減箱
    型號
    ZSC600-IV2
    總傳動比(i總)
    37.9
    帶速(V)
    1.6m/s
    帶速(V)
    1.6m/s
    傳動比(i)
    40
    總重量(G)
    162T
    傳動比(i)
    37.9
    工作類型(JC%)
    100%
    直徑(D)
    500mm
    直徑(D)
    320m
    工作類型(JC%)
    100%
    整機移動導電采用安全滑線型號HDH-1000-1250
     
    大車運行機構
    大車運行機構
    車輪
    型式
    開式
    減速器
    型號
    JZQ-500-II-2Z
    車輪
    ,軌距(L)
    30m
    .電動機
    型號
    YZB-160L-6
    開式傳動機構
    類型
    圓拄齒輪
    直徑(D)
    4000mm
    傳動比(i)
    10.35
    輪距×軸距
    0.78m×5m
    功率(N)
    11KWX4
    小齒輪齒數(ZI)
    21
    斗數(Z)
    9(雙向)
    開式傳動機構
    取料機構類型
    擺線針輪
    輪數(n)
    8
    轉速
    935r/min
    惰輪齒數(Z2)
    43
    單斗容量
    0.03m
    傳動比i
    12.8
    直徑(D)
    500mm
    減速器
    型號
    蝸輪減速器
    驅動輪齒數(Z3)
    55
    輪數 (N)
    5.66rpm/11.3rpm
    擺線針輪針數Z1
    10
    速度
    第一檔(V進)
    6.47m/min
    40
    模數(m)
    8mm
    傳動比(i)
    傳動比
    72.62
    電動機
    型號
    JDOC-180ZM-8/4
    擺線針輪針數Z2
    128
    第二檔(V退)
    14.24m/min
    制動器
    型號
    TJ2-200
    總傳動比(i)
    104.8
    功率(N)
    15KW/22KW
    總傳動比(i總)
    129.375
    推薦鋼軌(P)
    43`50Kg/m
    制動力距(MZL)
    16kg-m
    工作類型(JC%)
    25%
    轉速(n)
    750rpm/500rPM
    工作類型(JC%)
    100%
    ****輪壓(pmax)
    20T
    配用電磁鐵型號
    MZDI-200
    步進距離 200 400mm
    Main technical parameters

    1、The cart and dolly running are all speed-adjusted by transducer.
    2、This machine adopts the PLC program concentrated control on the reclaiming, cart and dolly running, lighting and watering, etc in the driver's room.
    3、The throughput of the reclaimer is Q=1500T/HV and the span could be 32m, 28m and 25m, it could work backward and forward, from left to right and reclaim the materials from positive and negative directions at any point.
    4、If the machine is equipped with claw equipments, when the materials are piled with 45°slope, it means the normal operation; with 60°, the claw reaches the material stock first while the bucket wheel machine fails to take it, then the dolly running mechanism shall be started to take the claw off before continuous work.
    5、In order to protect the reclaiming coal tub of the bucket wheel, it shall be 50MM away from the ground.
    6、Material height offside engine shall be set inside the chute of the machine, retaining switch and rubber baffle on the top of the dolly rail to prevent the aberration of the dolly. The dart frame shall be set with the retaining switch and rubber baffle too.
    7、In order to prevent the seeper on the working site in rainstorm season, this equipment shall consider the solution of gate legs adjustment(SGL240-13-00).
    8、The ingredient conveyor is electrically controlled on the matching flow, in the future the computer and electrical belt measure will be installed to control the mixture ratio.
    9、The metal structure of this equipment all experiences the sand spray and rust removal, spray the anticorrosive varnish once and the green primer twice.
    10、As the gate legs are adjustable, the chassis of the sliding current collector shall have the corresponding adjustable cushion coat.
    11、The rail slope control on the dart in the civil work shall be controlled within the range of 0 to 10 and the gauge error shall not be ±5MM.
    12、The relative height of the upper and lower beam shall not exceed 10MM and the non- perpendicularity isH/3000, namely 0.3MM.
    13、The reclaiming dart and dolly designed in this machine both have two speeds, either is available according to the operation for the convenience of the relation adjustment of charge and discharge, backward and forward.
    14、The cost of the safety sliding line is not included in the whole machine.
         
    14
    HQL1500-30-14
    slider current collector
    1
    Component
    1000
    1000
    13
    HQL1500-30-13
    adjustable gate leg 
    6
    A3
    1603
    9620
    12
    HQL1500-30-12
    dolly integrator
    1
    Component
    5000
    5000
    11
    HQL1500-30-11
    rubber buffer
    4
    Component
    100
    400
    10
    HQL1500-30-10
    operation room
    1
    Component
    2850
    2825
    9
    HQL1500-30-9
    coal bucket electric control assembly
    1
    Component
    1996
    1996
    8
    HQL1500-30-8
    ingredient transmission belt machine
    1
    Component
    1723
    1723
    7
    HQL1500-30-7
    transmission belt machine
    1
    Component
    9914
    9914
    6
    HQL1500-30-6
    lower beam
    2
    A3
    14182
    28364
    5
    HQL1500-30-5
    main beam
    1
    A3
    79826
    79826
    4
    HQL1500-30-4
    reclaiming mechanism
    2
    Component
    6440
    12880
    3
    HQL1500-30-3
    claw
    2
    A3
    1719
    3439
    2
    HQL1500-30-2
    Dolly operation mechanism
    2
    Component
    7610
    15200
    1
    HQL1500-30-1
    Cart operation mechanism 
    4
    Component
    3348
    13392
    SN
    code
    Name  quantity 
    Material
    single piece
    total
    remark
    weight
               
    總圖
    無錫市中機機械制造有限公司
               
               
    Mark
    處數
    分區
    更改文件號
    簽名
    年月日
    混勻雙斗輪雙向取料機
    設計
    王芳華
    標準化
    吳榮生
    階段標記
    重量
    比例
    校隊
    許國聯
    審定
    曹子賢
    185.6t
    1:50
    審核
    錢風源
    HQL1500-30
    工藝
    談緯紅
    Approval
    共張第張
     
     

    1. {关键词}